SK3Wiki

Denna sida är skrivskyddad. Du kan titta på källkoden, men inte ändra den. Kontakta administratören om du anser att du bör kunna ändra sidan.
[[Installation instruction for Raspbian]]
====== Installation instruction for Raspbian ======


This instruction does not cover all parts of the installation in detail, but is supposed to be easy to understand with limited knowledge and experience of Linux.

==== Download and install image ====
Download the image, Raspbian Stretch:
[[https://www.raspberrypi.org/downloads/raspbian/]]

//**Details:**
The official Raspbian installation instruction can be found here.
[[https://www.raspberrypi.org/documentation/installation/installing-images/README.md]] //

Download the image installation program **"Etcher"** and install the image on the card:
[[https://etcher.io/]]

Before inserting the SD-card in the Raspberry, **enable ssh**. Add a file named "ssh" in the root of the SD-card.
[[https://www.raspberrypi.org/documentation/remote-access/ssh/]]

Insert the SD-card and boot the Raspberry. The Raspberry PI will start with DHCP enabled (automatically request an ip-address from your local router). Find the ip-address of the raspberry pi, and logon. 
//**Details:**
[[https://www.raspberrypi.org/documentation/remote-access/ip-address.md]]//

==== Login and password ====
If you have a monitor and keyboard connected to your Raspberry, just logon at the prompt after it has started. You can also connect via ssh, without a monitor and keyboard connected. Good tools for SSH on Windows are: [[http://www.putty.org/|Putty]] or [[https://mobaxterm.mobatek.net/download.html|MobaXterm]]

**username:** pi

**password:** raspberry

Change the default password "raspberry" to something else, the command below change the password to "newpassword".
  passwd newpassword

==== Set static ip-address ====
 
Optionally set a static ip address by editing the dhcpcd.conf file. See the example in the bottom of the file. You can use "nano" editor. To save and exit the editor, press ctrl-x and answer Y to save:

  sudo nano /etc/dhcpcd.conf

Now is a good time to reboot your Raspberry.

  sudo reboot
  
If you can not reconnect to the new static ip address, something is wrong. Try power off/on, or connect a monitor.

==== Install svxlink ====

The **latest** 17.12.1 SvxLink release is not available directly in in the Raspbian Stretch image, but in "testing" software repository (Debian Buster release). To install the latest release, we temporarily add the Buster software repository and install SvxLink.
  sudo echo 'deb http://mirrordirector.raspbian.org/raspbian/ buster main' >> /tmp/svxlink.list
  sudo mv /tmp/svxlink.list /etc/apt/sources.list.d/
  sudo apt-get update

**Note:** Do NOT upgrade your complete system. We only want the SvxLink applications from the "buster" release!

Now install the svxlink-server package. The apt-get command will automatically select other packages needed for SvxLink to run.

  sudo apt-get -t buster install svxlink-server

=== Install SvxLink sounds ===

Next install the English sounds for SvxLink with the following commands.

  cd /usr/share/svxlink/sounds/
  sudo wget https://github.com/sm0svx/svxlink-sounds-en_US-heather/releases/download/14.08/svxlink-sounds-en_US-heather-16k-13.12.tar.bz2
  sudo tar xvjf svxlink-sounds-en_US-heather-16k-13.12.tar.bz2
  sudo ln -s en_US-heather-16k en_US

==== Basic test of the SvxLink Installation ====

It is now time to do some basic tests of the SvxLink installation. NO extra USB-sound card is needed, just connect a speaker to the 3.5mm audio output. The Speaker will be our TX. Since the Raspberry does not have a Microphone input, we need to disable the default RX (RX=NONE).

Edit the main SvxLink configuration file:

  sudo nano /etc/svxlink/svxlink.conf
  
In the SimplexLogic section, change the RX to NONE.
  
  [SimplexLogic]
  TYPE=Simplex
  RX=NONE
  TX=Tx1
SK3Wiki

Användarverktyg

Webbverktyg

Sidverktyg
